Volvo's Remote Steer Lets a Truck Driver Step Out of the VNX and Move It at Up to 5 mph by Remote

Volvo has rolled out a feature that lets a truck driver climb out of the cab and steer a full-size truck with a handheld remote, at walking speed.
Get Big Rig Daily every morning
The trucking stories drivers are talking about, in one short email. Unsubscribe any time.
After you sign up, check your inbox for an email from news@bigrigdaily.com and tap the button to confirm.
Quick answer
On Nov. 17, Volvo Trucks North America introduced Remote Steer for the new Volvo VNX, CDLLife reported. It "allows drivers to step outside the cab and maneuver the truck remotely at speeds of up to 5 m.p.h. using a handheld wireless controller." Volvo says this is the first time the dealer-enabled feature has been offered in North America, and that it is meant to let drivers act as their own spotter on crowded job sites.
Key facts
- Feature: Remote Steer, for the new Volvo VNX
- Announced: Nov. 17, 2026, by Volvo Trucks North America
- Top speed: 5 mph, forward or back
- Controller: handheld and wireless, paired to one truck's vehicle identification number (VIN)
- Safeguards: emergency stop buttons on the controller and the truck; stops working if too far away
How it works
According to Volvo, Remote Steer must be switched on while the driver is still inside the cab. After the driver steps out, the truck is paired with the controller, which is programmed to work with only one VIN. The truck stays in park until the operator releases the brake on the remote. A toggle then moves the truck forward or back.
Get Big Rig Daily every morning
The trucking stories drivers are talking about, in one short email. Unsubscribe any time.
After you sign up, check your inbox for an email from news@bigrigdaily.com and tap the button to confirm.
There is an emergency stop button on both the controller and the truck, and a feature keeps the controller from working if it is too far from the truck.
What it takes
Trucks must already be equipped with Volvo Dynamic Steering, the I-Shift transmission, an electronic braking system and a Body Builder Module, along with the Remote Steer software, CDLLife reported.
What Volvo says
"Anyone who has driven a remote-control car will understand the basic idea behind Remote Steer," said John Moore, product marketing manager at Volvo Trucks North America. "The difference is that this is a full-size work truck, so we built it with the safeguards a jobsite demands, giving drivers more control in situations where every inch matters."
"On a busy construction site, what a driver can see makes all the difference," Moore said. Volvo says the feature gives drivers a better view of their surroundings while keeping control of the truck. These are the company's claims; no outside safety data was included in the report.
A different kind of spotter
Some veteran truckers would say that is what a good spotter is for. Remote Steer is one more example of how truck controls keep changing, much like Kenworth's move to make its electronic parking brake standard in place of the push-pull knobs.
Would you trust a handheld remote to move a full-size truck around a busy job site?
Save this story for later

Sources
Get Big Rig Daily every morning
The trucking stories drivers are talking about, in one short email. Unsubscribe any time.
After you sign up, check your inbox for an email from news@bigrigdaily.com and tap the button to confirm.





