Local weather at weather.gov

Trucking Laws · Wyoming ·

Wyoming Troopers Stop a Semi Doing 90 MPH on I-80 and Find 28 Violations, With Only 2 of 10 Brakes Working

A semi truck and trailer pulled onto the shoulder of a Wyoming interstate with a highway patrol car behind it and a trooper checking a flat trailer tire
Illustration for this story. Not a photo of a specific location.

Wyoming Highway Patrol troopers pulled over a semi truck going 90 mph on Interstate 80 east of Laramie and found 28 violations during the inspection that followed, including a brake system with only 2 of its 10 brakes working, according to the patrol.

Quick answer

On Nov. 11, 2026, troopers stopped a semi traveling 90 mph in a 75 mph zone near the Summit on I-80 east of Laramie. A commercial vehicle inspection found 28 violations. Only 2 of the 10 brakes on the truck and trailer worked, one brake chamber was missing, and several tires were flat. The driver received a speeding citation, and the truck was placed out of service and towed.

The stop near the Summit

The stop happened on Nov. 11 near the Summit on I-80, east of Laramie, CDLLife reported. The posted speed limit there is 75 mph. Troopers said the truck was traveling at 90 mph.

As part of the traffic stop, troopers carried out a commercial vehicle inspection, a detailed check of the truck, the trailer and the required paperwork. The patrol said the inspection turned up 28 violations, including "several serious violations that were putting the driver and others on the road in danger."

What the inspection found

The Wyoming Highway Patrol described the worst of the problems in a statement shared by CDLLife.

"Only 2 of the 10 brakes on the truck and trailer functioned," the patrol said. "One brake chamber on the truck was completely missing with airlines capped," and "multiple tires had gaping holes in them and were flat."

A brake chamber is the part of an air brake system that turns air pressure into the force that applies the brake at a wheel. With the chamber gone and the air lines capped off, that wheel position had no working brake at all.

What happened next

The driver received a speeding citation, according to the patrol. The truck was placed out of service, meaning it could not legally move again until repairs were made, and it was towed from the scene because it was unsafe to operate.

The source did not name the driver, the carrier, the make of the truck or what it was hauling.

A thank you to careful truckers

The patrol used the stop to make a broader point. "Inspections of semi-trucks like this allow unsafe vehicles and drivers to be put out of service and taken off our roads," the Wyoming Highway Patrol said.

It also went out of its way to thank the many professionals who keep their equipment in shape. "In the meantime, the Wyoming Highway Patrol wants to say thank you to all the truckers out there who put the time and effort into taking care of their machines. Thank you for all the work you do to keep America moving," the patrol said.

That message reflects a point many truckers make themselves: one badly maintained truck can draw attention to an entire industry. Brake problems are a common focus of roadside enforcement, as the results of CVSA Brake Safety Week showed earlier this year.

Why brakes get so much attention

Brakes and tires are among the items roadside inspectors look at most closely, and the patrol said this inspection is the kind that takes unsafe vehicles off the road. This truck combined excessive speed, missing brake parts and flat tires, all found during one stop.

In this case, no crash was reported. The truck came off the road at a traffic stop instead.

How does a truck end up with 2 working brakes out of 10 without the driver, the mechanic or the company catching it?

Save this story for later

A semi truck and trailer pulled onto the shoulder of a Wyoming interstate with a highway patrol car behind it and a trooper checking a flat trailer tire

Sources